Density 14.0 Tungsten Carbide Wear Plate / Board For Manufacturing Punching Dies
Specification of carbide board
Tungsten carbide plates gets perfect microstructure, good wear resistance and high strength.
Below are sizes available for now, aslo we can customize for you.
| Grade | Density | Hardness | T.R.S | Performance&application recommended |
| g/cm3 | HRA | Mpa |
| YG6A | 14.85 | 92.5 | 2000 | Fine grain alloy,good wear resistance,it is suitable for manufacturing forming cutter,wear-resistant parts etc |
| YG8 | 14.7 | 89.8 | 2800 | High bending strength,wear resistance lower than YG6A,suitable for manufacturing forming cutter,wear-resistance part etc |
| YG11 | 14.4 | 88.5 | 2900 |
| YG15 | 14 | 87 | 3000 | suitable for manufacturing punching dies,wear-resistant parts |
| YG20 | 13.5 | 85.5 | 2800 | High bending strength,suitable for manufacturing progressive dies and other punching dies. |
| YG13X | 14.2 | 90 | 3200 |
| YS2T | 14.25 | 92 | 2500 | Fine grain alloy,with high wear resistance,bending strength,bonding resistance and thermal strength,it is suitable for maching refractory alloys,stainless steel,high manganese steel,etc |
| L | W | S |
| 200 | 200 | 15-45 |
| 150 | 150 | 15-45 |
| 150 | 100 | 15-45 |
| 150 | 130 | 15-45 |
| 150 | 80 | 15-45 |
| 120 | 120 | 15-45 |
| 100 | 100 | 15-50 |
| 100 | 50 | 15-50 |
| 100 | 45 | 15-50 |
| 80 | 55 | 10-50 |
| 80 | 40 | 10-50 |
| 70 | 35 | 5-50 |
| 45 | 25 | 3-20 |
| 35 | 19 | 5-30 |
| 20 | 20 | 5-20 |
| 18 | 13 | 5-20 |
| ... | ... | ... |
Production of carbide board
step one, when we received and confirmed customer orders, we sill start to grind, dry, screen raw material to make powder.
step two, start to manual press into shape by manual machine.
step three, semi products inspection, check every carbide board if has hole,broke,laminating ect
step four, after inspection, then we will put carbide board into sintering furnance to sinter, carbide board blanks will reach high wear resistance and strength through high temperature sintering.
step five, grinding and surface treatment, if customer has tolerance requirement, we will grind carbide board blanks, then clean surface and sand blast.
Company brief overview
Zhuzhou Mingri Tungsten Carbide Co., Ltd. was established in May of 2001 with the investment of RMB 40 million. We have up-to-date production machine line and a lot of technicians.
Zhuzhou MingRi Cemented carbide co.,ltd is located in the tungsten carbide hometown , convenient transportation, from changsha airport just 40 minutes, wuhan just 1.5 hour, from guangzhou just 2 hours. A favorable peripheral environment for cemented carbide manufacturing provides a natural barrier. Convenient traffic for tomorrow's internationalization laid a wide road.
We specialize in various of tungsten carbide products. Our products are sold to the UK, Europe, Japan, Korea, Taiwan area and Southeast Asia.
Product Tags:
|
|
Density 14.0 Tungsten Carbide Wear Plate / board For Manufacturing Punching Dies Images
|
